 |
 |
| "MV" Series: cut with manual feeding through handwheel |
"A" Series: control panel |
 |
 |
| "A" Series: motorized feeding |
Canalized cooling and electric device with cable chain |
 |
| Cut from 0° up to 45° |
 |
 |
| Easy regulation of cut depth with recirculating ballscrew sleeve, using manual handwheel |
Blade height regulation |
 |
 |
| Head movement by means of bearings and holder with re-circulating ballscrews which run on cemented, grinded and chromed linear guides |
Closed circuit cooling system with 48 V. submerged electric pump, return tank and tap for cleaning |
 |
 |
| Machine equipped with two rubber wheels which facilitate the movement |
Supplied with service keys and operator manual |
|
SMERALDA LINE BT
70 | 90 | 105 | 130
160 | 175 | 200
Sawing machines for marbles, stone and bricks in different sizes and models, with following functioning:
• Traction manual machine
• Traction and screw manual machine (MV)
• Automatic (A)
Stable and versatile machines which allow to rotate the head group with precision and easiness so as to execute inclined cuts from 0° up 45° on the left.
Cutting cycles
• BASIC 70 - 90 - 105 - 130 - 160 - 175 - 200:
|
 |
| quick cut operation (suitable for small sizes such as 70, 90 and 105) at manual functioning through low tension handgrip. |
• MANUAL "MV" 70MV - 90MV - 105MV - 130MV - 160MV - 175MV - 200MV:
|
 |
| cut operation as previous one with the possibility to use a "SCREW" control in order to make feeding more constant and execute workings when the handgrip is far from the operator (suitable for medium/ big sizes such as 130, 160, 175 and 200). |
• AUTOMATIC "A" 130A - 160A - 175A - 200A:
|
 |
| with motorized feeding and speed regulation from control panel and "SCREW" auxiliary control for difficult cuts, changeable thickness etc. |
 TECHNICAL DATA
 DIMENSIONS
 ACCESSORIES
 back |
products
